Through the 1920's, when the USAAC was in search of a suitable projector for aircraft, they used a variety of commercial types. These were all typically the 25mm types (one inch) or 10 gauge pistols. They had no universal standard until the adoption of the M2.
Those longer barreled H&R pistols were intended to fire a parachute type signal as well, which used longer cartridges. This basic data sheet from the USAAC illustrates some of this pistol. Note the "A" signifies Alloy or aluminum, The bars version seen above was technical "B" for Brass.
HARRINGTON & RICHARDSON Mark III - One Inch
-
survivalrescue
- User
- Posts: 12
- Joined: Tue 25 Feb 2020, 20:52
Re: HARRINGTON & RICHARDSON Mark III - One Inch
You do not have the required permissions to view the files attached to this post.
Re: HARRINGTON & RICHARDSON Mark III - One Inch
I have 3 Mark III Brass examples. One is Navy marked, so they were probably made for more than just the USAAC. They are quite difficult to find.
Guns have only two enemies, rust and politicians.
I am still looking for ANY information regarding the European Use of the Original Costons flares from 1859 through 1881. Photo's, Patents, contracts & orders, ANY INFORMATION IS NEEDED ! !
I am still looking for ANY information regarding the European Use of the Original Costons flares from 1859 through 1881. Photo's, Patents, contracts & orders, ANY INFORMATION IS NEEDED ! !
-
survivalrescue
- User
- Posts: 12
- Joined: Tue 25 Feb 2020, 20:52
Re: HARRINGTON & RICHARDSON Mark III - One Inch
I found vague reference to the US Navy purchasing other models outside of the Remington Mark-III. I only mention the Mark-III since I'm referring to post WWI. At some point, Remington stopped making the Mark-III and to supplement demands, was when the Navy purchased other models to supplement demand. The cease of production, that I gathered, was sometime in the latter part of the 1930's.
It is interesting to know about the Navy marked H&R pistol.
It is interesting to know about the Navy marked H&R pistol.
-
somd_mustangs
- User
- Posts: 34
- Joined: Sat 19 Sep 2015, 03:32
Re: HARRINGTON & RICHARDSON Mark III - One Inch
For info, I recently acquired an identical H&R Mark III long-barrel, S/N A195.
You do not have the required permissions to view the files attached to this post.
Re: HARRINGTON & RICHARDSON Mark III - One Inch
I came across this date code chart for the H&R flare pistols.
Note that A is not for alloy or aluminum and B is not for Brass. It it a date code.
Year
Serial Number suffix
Year Serial Number
1940 A 1953 N 1966 AC 1979 AT
1941 B 1954 P 1967 AD 1980 AU
1942 C 1955 R 1968 AE 1981 AX
1943 D 1956 S 1969 AF 1982 AY
1944 E 1957 T 1970 AG -- --
1945 F 1958 U 1971 AH* -- --
1946 G 1959 V 1972 AJ -- --
1947 H 1960 W 1973 AL -- --
1948 I 1961 X 1974 AM -- --
1949 J 1962 Y 1975 AN -- --
1950 K 1963 Z 1976 AP -- --
1951 L 1964 AA 1977 AR ** -- --
1952 M 1965 AB 1978 AS -- --
Note that A is not for alloy or aluminum and B is not for Brass. It it a date code.
Year
Serial Number suffix
Year Serial Number
1940 A 1953 N 1966 AC 1979 AT
1941 B 1954 P 1967 AD 1980 AU
1942 C 1955 R 1968 AE 1981 AX
1943 D 1956 S 1969 AF 1982 AY
1944 E 1957 T 1970 AG -- --
1945 F 1958 U 1971 AH* -- --
1946 G 1959 V 1972 AJ -- --
1947 H 1960 W 1973 AL -- --
1948 I 1961 X 1974 AM -- --
1949 J 1962 Y 1975 AN -- --
1950 K 1963 Z 1976 AP -- --
1951 L 1964 AA 1977 AR ** -- --
1952 M 1965 AB 1978 AS -- --
Guns have only two enemies, rust and politicians.
I am still looking for ANY information regarding the European Use of the Original Costons flares from 1859 through 1881. Photo's, Patents, contracts & orders, ANY INFORMATION IS NEEDED ! !
I am still looking for ANY information regarding the European Use of the Original Costons flares from 1859 through 1881. Photo's, Patents, contracts & orders, ANY INFORMATION IS NEEDED ! !